Red Light Therapy for Energy: Why ATP Is Only Half the Story
Short answer: red and near infrared photobiomodulation can plausibly raise cellular ATP output and improve short term energy or performance in specific contexts, though human results are mixed. The mechanism runs through mitochondria, where light absorbed by cytochrome c oxidase may support more efficient ATP production. At Valo Red Light we build devices around that mechanism, but dosing matters: follow the instructions for use and stop if a panel or bed feels too hot.
TL;DR:
- A cyclist trial found time to exhaustion improved roughly 10–12% after treatment before exercise, but gains weakened across repeated maximal efforts.
- In a randomized trial of 43 people with brain fog after COVID, attention and cognitive scores improved modestly, while fatigue outcomes favored sham treatment.
- For broader use, a conservative starting routine is about 10 minutes, 3 to 5 times weekly; assess results after 4 to 8 weeks.
- Stop if skin feels uncomfortably warm, follow the device’s distance and time limits, and remember that FDA clearance applies only to its stated intended use.
Table of Contents
- What red and near infrared light therapy actually is
- How red and near infrared light may raise cellular ATP
- What human trials show about energy, fatigue, and performance
- Safety, device reports, and what regulatory clearance actually means
- Dosing and routines if your goal is more energy
- How Valo Red Light devices fit different energy and recovery goals
- How red light compares with other ways to boost energy
- How often to use red light therapy for lasting energy benefits
- What a typical red light therapy session feels like
- Fitting red light therapy into a daily routine
- Is red light therapy worth trying for low energy?
- Try red light therapy for energy with Valo Red Light
- FAQ
- Sources
What red and near infrared light therapy actually is
Photobiomodulation, often shortened to PBM, is the clinical term for what most people call red light therapy: exposing skin or tissue to specific wavelengths of red and near infrared light to trigger a biological response rather than heat or burn it. The field covers several hardware categories, each suited to a different goal.
- Panels: stand up or wall mounted units for whole-body or large-area sessions.
- Beds: enclosed or open full-body systems for systemic, hands-free treatment.
- Masks: facial devices focused on skin tone and texture.
- Intranasal and transcranial devices: small emitters aimed at the nasal cavity or scalp for brain-adjacent effects.
Most consumer and clinical devices operate in two bands: roughly 600 to 700 nanometers (red, better absorbed by skin and shallow tissue) and 760 to 900-plus nanometers (near infrared, which penetrates deeper toward muscle and, in some devices, bone). Skin and joint applications often lean on the red band, while muscle recovery and brain-adjacent protocols use more near infrared.
How red and near infrared light may raise cellular ATP
The leading explanation starts with cytochrome c oxidase, an enzyme inside the mitochondrial electron transport chain. Red and near infrared photons appear to get absorbed by this enzyme, which can modulate electron flow and, in turn, support increased ATP output in the cell. Since ATP is the molecule cells spend to do almost anything, from muscle contraction to neuron firing, a cell with more efficient energy production has a plausible path to feeling or performing better.
A few secondary mechanisms likely amplify that core effect. Light exposure is linked to nitric oxide release, which can dilate blood vessels and improve local blood flow and oxygen delivery. Some research also points to a reduction in reactive oxygen species under certain conditions, which could ease oxidative stress on tissue. A newer and still-debated framework, sometimes called photometabolism, proposes that light also interacts with collective vibrational modes in water and proteins inside cells, modulating mitochondrial electron transfer kinetics beyond the classic cytochrome oxidase story.
None of this is a settled, singular pathway. Outcomes are highly sensitive to wavelength, dose, timing, and tissue depth, which is a major reason lab-bench findings on isolated mitochondria do not always translate cleanly into a measurable boost in a living, moving person.
What human trials show about energy, fatigue, and performance
The clearest signal in human research comes from acute, pre-exercise use in athletes. In a randomized, double-blind, crossover trial, cyclists who received photobiomodulation before exercise improved their first and second time-to-exhaustion tests by roughly 10 to 12 percent, alongside faster oxygen-use kinetics and better muscle oxygenation. That effect attenuated across repeated maximal efforts in the same session, which matters for how realistic repeated-use expectations should be.
- Pre-exercise PBM shows the most consistent short-term performance gains in trained cyclists.
- A pilot trial of home-based intranasal and transcranial PBM for post-COVID brain fog found modest cognitive gains, strongest in adults under 45.
- Longer, multi-week training programs that add PBM show inconsistent results, with some showing no benefit over placebo.
In the post-COVID pilot, attention and composite cognitive scores improved modestly in a 43-person randomized, double-blind, sham-controlled trial, though fatigue outcomes actually favored the sham group over active treatment. That mismatch, cognition up, fatigue not improved, illustrates how energy-adjacent benefits can be real but narrow rather than global.
A broader systematic review of PBM and muscle-focused protocols found heterogeneous outcomes across trials, with benefits depending heavily on parameters like dose and timing rather than appearing reliably across the board. The practical read: evidence is strongest for acute, targeted priming right before a demanding effort, weaker and less consistent for sweeping claims about chronic, all-day energy.
Safety, device reports, and what regulatory clearance actually means
Red and near infrared light therapy has a generally favorable safety profile when used as directed, but it is not risk-free. The FDA’s MAUDE database includes reports of excessive heating during routine sessions, including one case during a six-minute treatment where the device was later found to meet specifications but the instructions for use needed clearer safety guidance. That is a useful reminder that a device performing within spec can still cause discomfort if used incorrectly.
It also helps to know what “FDA-cleared” does and does not mean. Clearance for a wellness or therapeutic light device typically covers a specific intended use, such as temporary relief of minor muscle or joint pain, not a blanket claim about energy or cognitive performance. A consumer wellness panel and a clinical-grade therapeutic device can look similar but carry different clearance scopes.
- Check the panel or bed surface temperature periodically during longer sessions.
- Keep the distance and session time within the range stated in the instructions for use.
- Stop the session if skin feels uncomfortably warm or irritated.
Pro Tip: Set a timer for your session length instead of guessing, since losing track of time is the most common way people overshoot a safe dose.
Dosing and routines if your goal is more energy
Published trials that measured energy-relevant outcomes generally used sessions in the 10 to 20 minute range, several times a week, with exact parameters varying by device, wavelength, and target tissue. Muscle-focused protocols in the literature have used energy doses covering a wide range from low to high levels per muscle group, depending on protocol, which underscores why matching distance and time to your specific device’s output matters more than copying a number from a different study.
A conservative starting routine looks like this:
- Begin with about 10 minutes at a moderate distance, 3 to 5 times a week.
- Increase session length or frequency only if your device’s instructions for use allow it and you are tolerating sessions well.
- Time sessions before a workout if the goal is acute performance priming, based on the athletic trial pattern.
- Track a simple subjective energy rating, sleep quality, and a performance marker like workout time-to-exhaustion or rep count.
- Give the routine 2 to 6 weeks before judging whether it is doing anything measurable.
Because effects in the human trials were modest and context-dependent, the honest expectation is a possible edge, not a guaranteed transformation. Treat the trial period like a small experiment on yourself rather than a foregone conclusion.
How Valo Red Light devices fit different energy and recovery goals
Our product lineup splits naturally along the same lines the research does: acute, targeted use versus broader systemic sessions. Full-body beds suit people chasing the systemic, whole-body exposure that recovery and circulation research points toward, while targeted panels fit the pre-exercise priming pattern seen in the cycling trial. A smaller, portable device makes sense for someone who wants a quick, localized session before a workout rather than a full-body commitment.
When choosing between device types, match the footprint to the use case: a systemic goal like general recovery or sleep favors a bed, while a local goal like priming a specific muscle group before training favors a panel. Matching intended use to device size keeps dosing realistic and consistent with what the instructions for use recommend.
How red light compares with other ways to boost energy
Caffeine remains the most common energy tool, and it works through a completely different route: blocking adenosine receptors to reduce perceived fatigue, rather than acting on mitochondrial ATP production directly. It acts fast and reliably but wears off, often with a crash, and heavy daily use can affect sleep quality.
Structured exercise and strength training build energy capacity over months by improving mitochondrial density and cardiovascular efficiency, a slower but well-established route with a much larger evidence base than photobiomodulation currently has.
Sleep optimization, through consistent schedules and tools like sleep trackers or blackout curtains, addresses the most common root cause of low energy directly, since poor sleep undermines nearly every other intervention.
Where PBM differs is in its acute, non-stimulant profile: the strongest human evidence, the cycling time-to-exhaustion trial, showed a same-session performance edge without the jitteriness or crash pattern associated with stimulants. It is not a replacement for sleep or training adaptations built over months, but it fits as an add-on for pre-effort priming or as part of a recovery routine alongside those more established habits. For musculoskeletal pain or injury that’s sapping daily energy, hands-on options like myotherapy and fascial distortion model treatment address a different piece of the puzzle and can be a reasonable complement rather than a competitor to light-based recovery tools.

How often to use red light therapy for lasting energy benefits
Because the clearest human evidence comes from acute, pre-exercise sessions, the frequency question splits into two reasonable approaches depending on your goal. For performance priming before a workout or demanding task, a session shortly beforehand mirrors the protocol used in the cycling study, where effects were measured within the same session rather than built up over weeks.
For a broader recovery or energy-support routine, 3 to 5 sessions a week over several weeks reflects the general pattern across most published protocols, though no single trial has established one definitive long-term schedule for energy specifically. Multi-week training studies that layered PBM onto a program showed inconsistent results, so treating consistent use as a potential support rather than a guaranteed cumulative booster keeps expectations realistic.
A practical long-term protocol looks like steady, moderate use rather than escalating doses: keep session length and distance within your device’s instructions for use, reassess after 4 to 8 weeks, and adjust frequency based on how you are actually responding rather than assuming more sessions automatically means more benefit. If a subjective energy scale, sleep tracking, or workout performance has not shifted meaningfully by that point, the protocol may need adjusting or may simply not be the right lever for your particular fatigue.
Consistency matters more than intensity here. A short, regular session you actually keep up with will likely outperform an ambitious schedule abandoned after a week.

What a typical red light therapy session feels like
Most people describe red and near infrared light sessions as gentle and warm rather than intense. There is no cutting, no significant pain, and no sedation involved, since the light itself does not require anesthesia or recovery downtime the way a medical procedure would.
A mild warming sensation on the skin is common and expected, particularly with near infrared wavelengths, which penetrate deeper into tissue. That warmth should stay comfortable throughout the session. The FDA MAUDE reports on excessive heating are a useful signal that discomfort or unusual heat is not normal and is a cue to stop and check your distance or session length.
Some people report a sense of relaxation during or shortly after a session, plausibly tied to the same nitric oxide and blood flow changes implicated in the mitochondrial mechanism, though this response varies person to person and session to session. Red light exposure typically does not cause drowsiness the way some supplements can, which is part of why pre-workout timing is common in the athletic research. A short 10-minute routine aimed at joint comfort illustrates how brief and low-effort a session can be once the device and timing are dialed in.
Fitting red light therapy into a daily routine
The sessions that stick tend to be the ones attached to an existing habit rather than scheduled as a separate task. Pairing a quick panel session with a pre-workout warmup, a morning routine, or winding down before bed removes the friction of deciding when to fit it in.
For acute energy priming, timing a session shortly before a workout or demanding block of the day lines up with how the cycling research measured its effect. For general recovery or wellness goals, an evening or post-workout session fits naturally alongside other recovery habits like stretching or a cooldown.
A full-body bed session works well for someone who wants one consistent, hands-free block of time each day, while a smaller, portable panel suits someone who travels or wants to fit a quick session into a lunch break. Keeping a device somewhere visible, near a yoga mat or a home gym corner, makes the habit easier to sustain than one tucked away in a closet. People managing a chronic condition such as fibromyalgia-related fatigue may find a fixed time of day, rather than an irregular one, makes it easier to notice whether sessions are actually helping over several weeks.
Is red light therapy worth trying for low energy?
Red light therapy is not a cure-all, and I would not recommend it as a first-line fix for general fatigue. Where it earns a reasonable trial is narrower: acute priming before a demanding workout, or as a cautious pilot approach for brain fog, backed by small but real studies.
Track something objective, like time-to-exhaustion, rep counts, or a simple energy rating, for 4 to 8 weeks before deciding. If nothing shifts, or if you notice any discomfort, stop and talk to a doctor, especially if fatigue is tied to a broader medical condition.
— Andrew
Try red light therapy for energy with Valo Red Light
If the mitochondrial case for red light has you curious, the practical question is which device actually fits your routine. Our lineup splits naturally between systemic sessions for people chasing recovery and sleep benefits, and targeted options for anyone who wants a quick pre-workout priming session.
- Full-body beds for systemic recovery and whole-body exposure.
- Space-efficient full-bed options for daily sessions at home.
- Targeted panels built for muscle priming and localized use before training.
Whichever device fits your routine, start conservative and follow the instructions for use that ship with it. Browse the full Valo Red Light lineup, including the Aura Red Light Bed, Halo Red Light Bed, and Valo Blaze, to find the right starting point.
This article is general information, not a substitute for advice from a qualified doctor. Consult a qualified healthcare professional about your own circumstances before acting on anything here.
FAQ
Can red light therapy give you more energy?
It can plausibly support short-term energy or performance in specific contexts, most clearly as a pre-exercise priming tool that improved time-to-exhaustion in cyclists by about 10 to 12 percent. Broader, all-day energy claims are not well supported by current human trials.
What is the downside of red light therapy?
The main practical risk is discomfort from excessive heat, which FDA device reports have documented during sessions that ran too close or too long. Following the device’s instructions for use and stopping if skin feels too warm addresses most of this risk.
Does red light reduce cortisol levels?
Human trial data in this article do not directly measure cortisol, so a clear answer is not available from the sources here. What research does support is a plausible link between light exposure, nitric oxide release, and improved blood flow, which may contribute to the relaxed feeling some people report.
Why do I feel so good after red light therapy?
A sense of relaxation or well-being after a session is plausibly connected to nitric oxide release and improved local blood flow, part of the broader mitochondrial mechanism researchers describe. This response varies from person to person and is not yet tied to a single confirmed cause in human trials.
Sources
- Photobiomodulation for cognitive dysfunction (Brain Fog) in post-COVID-19 condition: a randomized double-blind sham-controlled pilot trial
- PBMT effects on cycling performance and VO2 kinetics
- Photobiomodulation therapy for muscular performance and fatigue — systematic review/meta-analysis
- FDA MAUDE device reports (example: excessive heating complaint)
